Crosspoint Menu - Video Layer; Grid View - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
8.4. Crosspoint Menu - Video Layer
8.4.1. Grid View
6 5 4
7
8
9
The grid view of the crosspoint menu - Video layer in Matrix mode
The Concept
The Crosspoint menu displays the UBEX matrix in grid layout with all sources (the input ports of the
transmitters / transceivers) and destinations (the output ports of the receivers / transceivers). Clicking on
a source or destination panel the properties and settings of the selected item appear on the right side.
Clicking on the icon the properties section opens in new window. The selected source/destination and
crosspoint are framed with orange. #switch #crosspoint #gridview
Legend of the Crosspoint Menu
1 Device Discovery Clicking on the button results in returning to the Device Discovery window. The
connection with the current device will be terminated.
Main menu The available menu items
2
Menu, Control
crosspoint can be displayed in Grid view and Tile view. The
Settings, and the
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
3 2
q
(Crosspoint Menu - Video Layer, EDID Management
Menu, Settings menu, and Video Wall Setup) are displayed. The
Device
Terminal Window are available under the Settings menu.
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
3 Navigation
buttons
Device label of
4
1
the MMU
5 Auto VW layout
t
activation switcher
r
Audio follows
6
video switcher
e
7 Layer tabs
Source streams
8
w
9 Connections
Destination
q
streams
w Properties
window
Search field
e
Selected /
r
Highlighted
streams
t Show Inactive
Map, MMU
UBEXes / Disabled
Streams switchers
Clicking on the navigation buttons shows the available sources/destinations
and crosspoints which cannot be displayed within the recent window size. The
 icon resets the grid to the default view.
The device label of the MMU is displayed here. It can be modified by the user to
any unique name by clicking on the icon. The device label can be 39 characters

long and ASCII characters are allowed. Longer names will be truncated.
Auto Video Wall layout activation switcher, see the details in the
Menu with Video Wall section.
The explanation of the two available options is the following:
▪ Enabled: the audio stream follows the video stream when the video
crosspoint is changed. Beside of this the audio streams can be switched
separately from the video streams on the Audio crosspoint tab.
▪ Disabled: switching of a video stream does not effect the audio
crosspoint state.
The video and the audio crosspoint panel can be selected on the tabs.
Each tile represents a stream coming from one of the input ports of the
transmitter or transceiver. See the explanation of the source numbering in the
Source and Destination Numbering section.
The crosspoint connections can be selected in this table.
The tile means a denied connection (only for transceivers). The
explanation is the input port of the transceiver cannot be selected to the
output port of the same transceiver.
Each tile represents an output port of a receiver or transceiver. See the
explanation of the destination numbering in the
Numbering section.
The properties, available settings, and status information of the selected
source or destination are displayed in this section. Three tabs are available:
Stream, Port, and Device. Clicking on the icon the properties section
opens in new window. See more details about the source ports in the
Source Port Properties Window section and about the destination ports in the
Video Destination Port Properties Window section.
Streams, ports, and devices can be searched in the field. See the details in the
Search Field section.
Showing the currently selected connections. Move the cursor above the
desired crosspoint and the names of the source and destination are displayed
in the field.
When they are enabled, the inactive devices / disabled streams are shown in
the crosspoint table. When they are disabled, the inactive devices / disabled
streams are hidden.
69 69
Crosspoint
Source and Destination
Video