Receiver Mode; Transceiver Mode - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
4. UBEX Concept 4. UBEX Concept
4.1.2. Receiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 receiver
Fiber Optical Interface
The receiver can receive two HDMI video streams via the SFP+ / fiber
optical input ports (Fiber optical Link 1 and 2).
HDMI Output Modes
The receiver can transmit HDMI video streams on two HDMI 2.0
output ports. The signal can be up to 4K@60 Hz 4:4:4 in the case of
both outputs. The streams received from the remote endpoint device
can be routed to any HDMI outputs of receiver, e.g. the stream from
the TX - HDMI in 1 can be switched to the RX - HDMI out 1 or 2, or both
ones either.
The streams can be processed by the video processors. The processor
of the HDMI out 1 has video scaler, frame rate converter (FRC), and color
space converter (CSC) functions. The processor of the HDMI out 2 has
frame rate converter and color space converter functions.
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
The scaler settings are available in the LCD menu (see the details in the
RX HDMI Output 1 and 2 Ports
the details in the
the frame rate converter settings (FRC) are available in the LCD menu
(see the details in the
the LDC software (see the details in the
section).
HDMI Input Modes
The HDMI input ports of the receiver cannot accept video signals due
to software limitation.
Summary Tables
Accepted signal
Output signal
Signal source
Scaler
Frame rate converter
(FRC)
Color space
converter (CSC)
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
section) and in the LDC software (see
Scaler Panel - Output Side (RX/TRX Modes) section);
RX HDMI Output 1 and 2 Ports section) and in
FRC - Output Side (RX Mode)
HDMI INPUTS
HDMI input 1 HDMI input 2
 
HDMI OUTPUTS
HDMI output 1 HDMI output 2
up to up to
4K@60 4:4:4 4K@60 4:4:4
Selected input port Selected input port
of the remote device of the remote device
 
-
   
   
4.1.3. Transceiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transceiver
Fiber Optical Interface
The transceiver is able to send and receive HDMI video streams
together in the same time over the fiber optical links.
HDMI Input Modes
The transceiver can receive one HDMI video stream from the HDMI
in 2 input port. The signal can be up to 4K@60 Hz 4:4:4. The video
stream can be processed in the video processor (it contains frame
rate converter (FRC) and color space converter (CSC) functions). The video
processor settings are available in the LCD menu (see the details in
the Local TRX I2 Port section) and in the LDC software (see the details
in the FRC - Input Side (TX/TRX Modes) section).
The HDMI in 1 input port cannot accept video signal.
36 36