Transceiver Mode - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
5. UBEX Concept 5. UBEX Concept
5.1.3. Transceiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transceiver
Fiber Optical Interface
The transceiver is able to send and receive HDMI video streams together in the same time over the fiber
optical links.
HDMI Input Modes
The transceiver can receive one HDMI video stream from the HDMI in 2 input port. The signal can be up to
4K@60 Hz 4:4:4. The video stream can be processed in the video processor (it contains frame rate converter
(FRC) and color space converter (CSC) functions). The video processor settings are available in the LCD menu
(see the details in the L (Local) TRX I2 Port
Input Side (TX/TRX Modes) section).

ATTENTION! The HDMI in 1 input port cannot accept video signal.
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
section) and in the LDC software (see the details in the
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
HDMI Output Modes
The transceiver can transmit HDMI video streams on two HDMI 2.0 output ports. The signal can be up to
4K@60 Hz 4:4:4 in the case of both outputs.
The HDMI out 1 transmits the HDMI signal coming from the remote UBEX endpoint. The video stream can
be processed in the video processor (it contains scaler, frame rate converter (FRC) and color space converter (CSC)
functions). The video processor settings are available in the LCD menu (see the details in the
O1 Port section) and in the LDC software (see the details in the
section).
In default state, the HDMI out 2 transmits the HDMI signal coming from the HDMI in 1 input port so it
operates as a local output port. The stream cannot be affected by any video processing.
Source Multiplexer (MUX)
The source multiplexer (Source MUX) makes available routing more different source signals to the
HDMI output 2 port.
HDMI out 2
▪ Able to accept signal up to 4K@60 4:4:4 resolution via the local HDMI in 2 port;
▪ Able to copy the signal of the HDMI out 1 port up to 4K@60 4:4:4 resolution. This is the COPY function.
Summary Tables
Accepted signal
Scaler
Frame rate converter (FRC)
Color space converter (CSC)
Output signal
FRC -
Signal source
Scaler
Frame rate converter (FRC)
Color space converter (CSC)
Scaler Panel - Output Side (RX/TRX Modes)
HDMI INPUTS
HDMI input 1 HDMI input 2
up to 4K@60 4:4:4

-
-
-
HDMI OUTPUTS
HDMI output 1 HDMI output 2
up to 4K@60 4:4:4 up to 4K@60 4:4:4
HDMI in 2
Input port of the remote device
Copy of the HDMI out 1
 
 
 
54 54
L (Local) TRX
-
 
 
-
-
-