Recalling Analog Input Timing; Saving Analog Input Timing - IDK MSD-701AMP User Manual

9.8.10 Recalling analog input timing

Menu Top→INPUT TIMING→RECALL ANALOG SETTINGS
Setting for IN6 (Analog), IN7 (Analog) for each input signal
You can recall device information of registered analog RGB/analog YPbPr input video.
Perform this menu when the synchronous signal frequency is the same and multiple device data having
different input timings are registered or you want to set the input timing again.
Press the "MENU/ENTER" button to apply the setting.
If no signal is input, "NOT AVAILABLE NOW" will appear on the front display.

9.8.11 Saving analog input timing

Menu Top→INPUT TIMING→STORE ANALOG SETTINGS
Setting for IN6 (Analog), IN7 (Analog) for each input signal
Setting value No. 1 to No.99
You can register up to 99 analog RBG/analog YPbPr input timing settings, and you can name each device
data up to 14 characters using ASCII code 20 to 7D.
If you do not name the device table and press the "MENU/ENTER" button, the input resolution will be the
device table name automatically. If the device table name is already registered and press "MENU/ENTER"
button without specifying device table name, the input timing is saved to the device table name without
changing the device table name.
From the next time, video will be displayed at the registered timing when the same signal is input to other
channels.
Press the "MENU/ENTER" button to apply the setting.
If no signal is input, "NOT AVAILABLE NOW" will appear on the front display.
MSD-701AMP User Guide
【See: 9.8.11 Saving analog input timing】
99