Fixing Settings For Each Input Signal - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.7.10 Fixing settings for each input signal

Menu Top→INPUT SETTINGS→SIGNAL SETTING MODE
Setting for IN1 to IN7
Setting value
Setting mode
SELECTED ASPECT
[Default]
ANALOG TYPE
AUDIO LEVEL
ALL FIXED
―
OFF : Settings saved for each input signal are used to format the video output.
ON(FIXED) : Current settings are used to format the video output.
The MSD continuously monitors the input signals. If a particular input signal that has been presented to the
MSD before is input again, the MSD will output the signal at the same size and quality as during its previous
use.
You can select the setting saved for each signal or the current setting.
[Table 9.15] Individual settings for each digital or analog signal
Setting
ASPECT
ANALOG TYPE
AUDIO LEVEL
90
[Table 9.14] Input signal for output video
Setting value
OFF, ON(FIXED)
[Default] OFF
OFF, ON(FIXED)
[Default] ON(FIXED)
OFF, ON(FIXED)
[Default] ON(FIXED)
―
Digital signal Analog signal
Can be set Can be set
Cannot be set Can be set
Can be set Cannot be set
Remarks
Aspect ratio, analog input signal type and audio
input level can be set individually.
Does not load all settings saved for each input
signal but outputs the video with the current
setting.
【See: 9.2 Input signal automatic detection】
9.6.1 Aspect ratio
9.7.8 Analog input signal parameters
9.12.2 Audio input level offset