Table of Contents
Advertisement
7.6
Input Timing Settings
The MSD monitors signals at all times and sets the input timing automatically. Only if part of the video is cut off,
adjust the input timing finely by using this menu.
7.6.1
The total number of horizontal dots [H TOTAL DOTS]
You can set the total number of horizontal dots of analog RGB/analog YPbPr input video videos.
･The total number of horizontal dots: 400 to 4125 (Within sampling clock 13M Hz to 162M Hz)
[Default]: Depends on input signals
Horizontal
synchronizing signal
1. To set the total number of horizontal dots using menu:
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
H TOTAL DOTS
↓ SET key
[IN6 H TOTAL DOTS]
1344DOT
↓ ESC key: Returns to the previous screen.
Note:
You can set the total number of horizontal dots only if analog RGB or analog YPbPr signals are input. You can
only display the set value for input analog video signals or digital input signals, and you cannot change the
setting. If no signal is input, you cannot set the function and the message is displayed.
[IN6 H TOTAL DOTS]
NOT AVAILABLE NOW
2. To set the total number of horizontal dots using commands:
@GHT: Get the total number of horizontal dots
Video signals
Total horizontal dots = Dots per line
[Fig. 7.19] Total number of horizontal dots
▲▼keys: Select "INPUT TIMING".
▲▼keys: Select "H TOTAL DOTS".
▲▼keys: Set the total number of horizontal dots.
◄►keys: Select the desired input (IN1 to IN8).
For each input port/input signal
89
MSD-804FD User's Guide
Advertisement
Table of Contents
