Output Video Correction Initialization; Input Sharpness; Input Brightness; Input Contrast - IDK MSD-701AMP User Manual

9.10.4 Output video correction initialization

Menu Top→PICTURE ADJUSTMENT→OUTPUT SETTING INIT.
Setting for ALL, MAIN, PinP
Setting value NO [Default],
YES: Initializes the following settings of output video:
9.10.1 Output brightness
9.10.2 Output contrast
9.10.3 Output gamma
Press the "MENU/ENTER" button to apply the setting, and you will hear a long beep sound.

9.10.5 Input sharpness

Menu Top→PICTURE ADJUSTMENT→INPUT SHARPNESS
Setting for IN1 to IN7 for each input signal
Setting value -5 to 15 [Default] 0
You can set the desired level of sharpness for each input signal.

9.10.6 Input brightness

Menu Top→PICTURE ADJUSTMENT→INPUT BRIGHTNESS
Setting for IN1 to IN7 for each input signal
Setting value 80% to 120% [Default] 100%
You can set the brightness level for each input signal.

9.10.7 Input contrast

Menu Top→PICTURE ADJUSTMENT→INPUT CONTRAST
Setting for IN1 to IN7 for each input signal
Setting value R/G/B: 0% to 200% [Default] R/G/B: 100%
You can set the contrast for the input video image.
If you set "LINK" to "ON", only the setting for "R" can be adjusted, and in this mode, "G" and "B" will
automatically track the setting of "R".
MSD-701AMP User Guide
105