Table of Contents
Advertisement
MSD-701AMP User Guide
8.4.5 Registering bitmap
To register output video to bitmap memory:
1. Select [SYSTEM SETTINGS] from [MENU].
2. Set [ADVANCED MENU] to [ON].
3. Select [BITMAP] > [MAIN].
4. Set [FREEZE] to [ON] to freeze the output video temporarily.
If input channel is switched or input signal changes while [FREEZE] is processing, the video will be
unfrozen.
5. Click [CAPTURE] to start writing video to the bitmap memory.
Do not perform other WEB operations or power off the MSD during the operation.
6. A dialog box showing the end of processing appears. If the registration fails, an error message is
displayed.
Message
Video Capture is not available
because there is no input signal.
Memory Size Error is happened.
52
[Fig. 8.21] Registering output video
[Table 8.7] Bitmap registration error
The video cannot be captured because no input video is displayed.
The data cannot be saved because the input video is bigger than
reserved memory area.
Description
Advertisement
Table of Contents
