Test Pattern - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.4.7 Test pattern

Menu Top→OUTPUT IMAGE→TEST PATTERN
Setting value
HORIZONTAL
OFF [Default]
BLUE RASTER
CROSS HATCH
HORIZONTAL VERTICAL RAMP
RAMP
You can activate the MSD's internal test pattern generator and direct its signal to each output connector.
For test patterns other than "OUTPUT FRAME": Video is output on full screen with the resolution format as set
in Output resolution and the settings of Image position, Image size, and Cropping will be invalid.
"OUTPUT FRAME": Select this pattern if part of image is not displayed on the sink device.
Setting parameters for Image position and Image size on the output side will be adjusted in order to present
the test pattern appropriately on the display device.
Use "arrow" buttons (,
SCALE", "RAMP", and "ZEBRA". Some test patterns can be configured to scroll across the screen either
vertically or horizontally. Scrolling speed can be set in increments of 3 pixels per frame. Speed can be set up
to 30 pixels per frame with "▲" and "▼" buttons. You can check the residual image (resolution of moving
image) by displaying and scrolling the "ZEBRA" pattern.
70
VERTICAL
ZEBRA ZEBRA
GREEN RASTER
H-GRAY SCALE
[Fig. 9.6] Test pattern
, ▲, ▼) to scroll through the available patterns "COLOR BAR", "GRAY
HORIZONTAL
VERTICAL
STRIPE
STRIPE
RED RASTER
50% WHITE
RASTER
V-GRAY SCALE H-COLOR BAR
【See: 9.4 Output position, size, and masking】
【See: 9.4.1 Output resolution】
【See: 9.4.3 Image position】
【See: 9.4.4 Image size】
【See: 9.4.5 Cropping】
OUTPUT FRAME
100% WHITE
RASTER
V-COLOR BAR