Horizontal Active Area; Vertical Start Position; Vertical Active Area - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.8.4 Horizontal active area

Menu Top→INPUT TIMING→H ACTIVE
Setting for IN1 to IN7 for each input signal
Setting value 64DOT to 2900DOT (The total number of horizontal pixels - 64 or less)
[Default] Varies depending on the input signal.
You can set the horizontal active area of input video.
For horizontal settings, the total number of horizontal pixels must be greater than the number representing the
horizontal active area. Manually entered settings will be automatically limited to be within the MSD's accepted
value range.
If no signal is input, "NOT AVAILABLE NOW" will appear on the front display.

9.8.5 Vertical start position

Menu Top→INPUT TIMING→V START POSITION
Setting for IN1 to IN7 for each input signal
Setting value 10LINE to 2048LINE (The total number of vertical lines - Vertical active area or less)
[Default] Varies depending on the input signal.
You can set the vertical start positions of input video.
If the set value exceeds the limitation mentioned below, the display start position will be set automatically to a
value within the parametric limitation.
The total number of vertical lines > Vertical active area > Vertical start position
If no signal is input, "NOT AVAILABLE NOW" will appear on the front display.

9.8.6 Vertical active area

Menu Top→INPUT TIMING→V ACTIVE
Setting for IN1 to IN7 for each input signal
Setting value 10LINE to 2048LINE (The total number of vertical lines - 10 or less)
[Default] Varies depending on the input signal.
You can set the vertical active area of input video.
If no signal is input, "NOT AVAILABLE NOW" will appear on the front display.
96