Command Link - IDK MSD-701AMP User Manual

9.16.3 Command link

Menu Top→CONTROL COMMAND→COMMAND LINK
Setting for [Table 9.46] Control command execution condition
Setting value OFF [Default], CMD 1 to CMD32
The MSD has 40 command execution conditions as shown below. If these execution conditions are met,
control commands which are associated beforehand will be executed. One execution condition can be
associated to up to 10 commands. If multiple commands are associated, commands are executed in order of
registration. If the same command is associated multiple times, it is repeatedly executed.
"COMMAND" button can be toggled.
Set "TOGGLE" to "ON" to enable PLANE-B, and then you can select execution plane ("AUTO", "A(PLANE-A)",
or "B(PLANE-B)") at the time of power ON from "STARTUP".
If you select "AUTO", the condition at the time of power OFF will be maintained.
Press the "MENU/ENTER" button to apply the setting.
Control commands
CMD 1
CMD 2
CMD 3
CMD 4
CMD 5
CMD30
CMD31
CMD32
Execution condition
POWER ON
STANDBY
COMMAND A to
COMMAND I,
PLANE-A
COMMAND A to
COMMAND I,
PLANE-B
Linking
Execution order
[Fig. 9.28] Command link
[Table 9.41] Control command execution condition
Function
Standby button
COMMAND button
Execution condition
POWER ON DISPLAY1 POWER ON
1st CMD 3
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
Default: OFF for 1
Execution condition
DISPLAY POWER ON
DISPLAY POWER OFF
VIDEO:OUT-IN1 to
VIDEO:OUT-IN7,
VIDEO:OUT-OFF
AUDIO:OUT-IN1 to
AUDIO:OUT-IN7,
AUDIO:OUT-OFF
MSD-701AMP User Guide
CMD 4
CMD 1
st th
to 10
Function
Controlling sink device
power of OUT
Selecting video input
channel of OUT
Selecting audio input
channel of OUT
143