IDK MSD-701AMP User Manual page 19

# Feature
LINE input connector
⑧
HDMI output connectors
⑨
HDBaseT output
⑩
connectors
Analog audio output
⑪
connector
SPEAKER output
⑫
connector
RS-232C connector
⑬
LAN connector
⑭
REMOTE connector
⑮
CONTACT CLOSURE
⑯
connector
Maintenance connector
⑰
Power supply connector
⑱
Frame ground
⑲
Input connector for line audio
Connect audio mixer, CD player, or the like.
Connector type is 5-pin captive screw connector.
Output connectors for HDMI and DVI signals, interfaces sink devices
such as LC monitors and projectors.
Output connector for HDBaseT signal
Connects to a remote receiver over a category cable.
Analog audio output connector interfaces amplifiers and mixers
Connector type is 5-pin captive screw connector.
Output connectors for speakers
SPEAKER 1 : 4-pin captive screw connector 5.08 mm
SPEAKER 2 : 4-pin captive screw connector 5.08 mm
Or
2-pin captive screw connector (100-V high impedance
speakers)
3-pin captive screw connector for RS-232C serial control
For external control by communication commands or web browsers
I/O connector for following power control:
・ Button switch (input)
・ Receiving emergency stop signal (input)
・ Power distribution unit (output)
Connector type is 8-pin captive screw connector.
For external device control by dry contact closure
Connector type is 6-pin captive screw connector.
Factory use only
For use with supplied power cable
Use for bonding chassis to local ground.
An M4 screw is used.
MSD-701AMP User Guide
Description
[2/2]
19