Table of Contents
Advertisement
To register bitmap file to bitmap memory:
1. Select [SYSTEM SETTINGS] from [MENU].
2. Set [ADVANCED MENU] to [ON].
3. Select [BITMAP] > [MAIN].
4. Select the desired bitmap file from [FILE].
5. Click [SEND] to register the bitmap file to bitmap memory.
6. If the registration fails, an error message is displayed.
Message
File Name is invalid.
File Format Error is happened.
File Size exceeds the capacity.
Memory Allocation Error is happened.
[Fig. 8.22] Registering bitmap file
[Table 8.8] Bitmap transfer error message
The specified file name is not correct.
The MSD does not support this file.
The file exceeds the maximum resolution.
The memory for temporarily saving bitmap file could not be
reserved.
The error may possibly be solved by turning off the [POWER]
switch, turning on the switch again, and sending the bitmap file
again.
MSD-701AMP User Guide
【See: 9.19 Bitmap】
Description
53
Advertisement
Table of Contents
