Multi-Channel Audio Output Priority; Speaker 2 Output - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.11.12 Multi-channel audio output priority

Menu Top→OUTPUT AUDIO SETTINGS→OUTPUT PRIORITY
Setting value MULTI (Multi-channel) [Default], 2CH (Downmix)
If outputting multi-channel LPCM to a sink device, the MSD checks whether the sink device supports
multi-channel LPCM. If the sink device supports multi-channel LPCM, the MSD outputs audio with the format.
If the sink device does not support the format, the MSD outputs audio according to the priority setting of
multi-channel audio output.
If both multi-channel LPCM compliant sink devices and multi-channel LPCM non-compliant sink devices are
connected to the MSD in a system:
"MULTI" is selected : Multi channel audio is output.
"2CH" is selected

9.11.13 SPEAKER 2 output

Menu Top→OUTPUT AUDIO SETTINGS→SPEAKER OUT
Setting value
Setting value
4-16Ω(LO-Z) [Default]
100V(HI-Z)
The MSD has two speaker connectors:
SPEAKER 1 : 4-pin captive screw connector 5.08 mm
SPEAKER 2 : 4 or 2-pin captive screw connector 5.08 mm; 100-V high impedance speaker can
be connected.
114
: Downmixed audio is output.
[Table 9.22] SPEAKER 2 output
Connects to stereo speakers
4-pin captive screw connector 5.08 mm
Connects to high impedance speakers
2-pin captive screw connector 5.08 mm
【See: 9.11.11 Multi-channel audio output】
Description