Image Position; Image Size - IDK MSD-701AMP User Manual

9.6.4 Image position

Menu Top→INPUT IMAGE→IMAGE POSITION
Setting for IN1 to IN7 for each input signal
Setting value
Horizontal position : -Horizontal input size to + Horizontal output resolution [by 1 pixel] [Default] 0
Vertical position : -Vertical input size to + Vertical output resolution [by 1 line] [Default] 0
You can change the position of the displayed video image.
The image position is based on the upper left quadrant of the output video.
Image size should be bigger than image position. If the image position exceeds the limitation, the image
position will be set automatically to a value within the parametric limitation.

9.6.5 Image size

Menu Top→INPUT IMAGE→IMAGE SIZE
Setting for IN1 to IN7 for each input signal
Setting value
Horizontal size : Horizontal output resolution ÷ 4 to Horizontal output resolution × 4 [by 1 pixel]
[Default] Horizontal output resolution
Vertical size : Vertical output resolution ÷ 4 to Vertical output resolution × 4 [by 1 line]
[Default] Vertical output resolution
You can use these settings to control the size of displayed video image.
The video size is scaled based on the upper left quadrant of the input image position.
If you set "LINK" to "ON", only settings of "H"(Horizontal) can be set and "V" (Vertical) is set automatically
while retaining the current aspect ratio.
Note:
Numbers following "/" show the output resolution.
MSD-701AMP User Guide
【See: 9.6.4 Image position】
81