Deep Color Output; Window Transition Effect; Window Transition Speed - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.5.9 Deep Color output

Menu Top→OUTPUT SETTINGS→DEEP COLOR
Setting for ALL, HDMI OUT A, HDMI OUT B, HDBT OUT C
Setting value 24-BIT COLOR [Default], 30-BIT COLOR
You can select the color depth of HDMI signal.
"30-BIT COLOR": signals are output with "30-BIT COLOR" only if a sink device supporting Deep Color is
connected.
Since the transmission clock of "30-BIT COLOR" is faster than that of "24-BIT COLOR", noise may occur if a
poor-quality cable or long cable is connected. In those cases, the noise may be removed by selecting
"24-BIT COLOR".

9.5.10 Window transition effect

Menu Top→OUTPUT SETTINGS→VIDEO SWITCHING EFFECT
Setting for MAIN, PinP
Setting value
You can select a window transition effect for when the video inputs are switched.
If Automatic detection of video input interruption is set to "ON" and input signal is disconnected, this setting
will be applied.

9.5.11 Window transition speed

Menu Top→OUTPUT SETTINGS→SWITCHING EFFECT SPEED
Setting for ALL, MAIN, PinP
Setting value 100ms to 2000ms (by 10ms) [Default] 350ms
You can set the window transition speed for "FADE OUT/IN" or "WIPE OUT/IN" when input channels are
switched.
The setting will also be applied when Automatic detection of video input interruption is set to "ON".
76
[Table 9.8] Transition effect
Setting value
FREEZE→FADE OUT-IN [Default]
FADE OUT-IN
CUT
BOTTOM→TOP WIPE
TOP→BOTTOM WIPE
RIGHT→LEFT WIPE
LEFT→RIGHT WIPE
MAIN
✓
✓
✓
✓
✓
✓
✓
【See: 9.7.9 Automatic detection of video input interruption】
【See: 9.7.9 Automatic detection of video input interruption】
PinP
✓
✓
✓
N/A
N/A
N/A
N/A