Signal Off Priority; Ignoring Duration After Automatic Switching - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.9.2 Signal OFF priority

Menu Top→AUTO SETTING→SIGNAL OFF PRIORITY
Setting for ALL, MAIN, PinP
Setting value
Windows
ALL
MAIN
PinP
Selects alternate input channel when the input signal of currently-selected channel changes from "ON" to
"OFF".
Press the "MENU/ENTER" button to apply the setting.
The MSD switches input signal automatically as follows:
・ Switches to the input channel having input signal and highest priority.
or
・ If some channels have the same priority, the MSD switches to the lower numbered input channel
having an active input signal.
[Fig. 9.18] Input channel automatic switching "OFF" to "ON"

9.9.3 Ignoring duration after automatic switching

Menu Top→AUTO SETTING→IGNORING DURATION
Setting for ALL, MAIN, PinP
Setting value 0s000ms to 999s999ms [Default] 0s000ms
You can set the time from when input channel is switched automatically until when the next automatic
switching is performed. The automatic switching is not performed during the set time.
102
[Table 9.19] Automatic signal OFF priority
Input connector (IN)
IN1 to IN7
Input signal "ON"
Input signal "ON" → "OFF"
IN 1 IN 2
PRI 3 PRI 2
PRI: Priority
Setting value
Priority
OFF (Disabled) [Default],
1 (Highest) to 7 (Lowest)
IN 3 IN 1
PRI 1 PRI 3
IN 2 IN 3
PRI 2 PRI 1