Table of Contents
Advertisement
9.9 Input channel automatic switching
When signal input status changes by such as removing or inserting cables, the MSD can switch the input
channel automatically. The switching priority can be set for each input.
9.9.1 Signal ON priority
Menu
Top→AUTO SETTING→SIGNAL ON PRIORITY
Setting for
ALL, MAIN, PinP
Setting value
Windows
ALL
MAIN
PinP
The MSD automatically selects the input channel when signal input status changes from "OFF" to "ON".
Press the "MENU/ENTER" button to apply the setting.
The MSD switches input signals automatically as follows:
・ When input signal status of a channel changes from "OFF" to "ON" and that input channel has the
same or a higher priority level than the currently-selected channel.
or
・ When video is not input to the current input channel having higher priority than the input channel that
changes from "OFF" to "ON".
[Fig. 9.17] Input channel automatic switching "OFF" to "ON"
[Table 9.18] Automatic signal ON priority
Setting value
Input connector (IN)
IN1 to IN7
Input signal "OFF" → "ON"
Input signal "ON"
IN 1
IN 2
IN 3
PRI 3
PRI 2
PRI 1
PRI: Priority
Priority
OFF (Disabled) [Default],
1 (Highest) to 7 (Lowest)
IN 1
IN 2
PRI 3
PRI 2
PRI 1
MSD-701AMP User Guide
IN 3
101
Advertisement
Table of Contents
