Table of Contents
Advertisement
■ Error code
From the left to right, status of video output, digital audio output, and analog audio output is displayed.
Code
If any number or character is not displayed, video or audio is output correctly.
1
"9.5.1 Output signal" is set to "BLACK".
2
Displayed only for digital input. DDC power supply is not input.
(If no source device is connected, this error code is displayed).
3
No video signal is input.
4
Displayed only for digital input. Video or audio output of source device is in a Mute status.
5
Displayed only for digital input. Signal with HDCP are input, but the sink device does not support
HDCP. (This error code may also be displayed while authenticating HDCP).
6
Displayed only for digital input. The source device does not output required information (packets)
for outputting video or audio.
7
Signal that are not supported by the MSD are
input. (Sampling clock is out of the range)
8
－
9
－
A
Input channel is set to "OFF".
*1
Input status of analog audio signal cannot be detected. Even if this status is not displayed,
audio may sometimes not be output when analog input is selected.
*2
This status is only for HDMI output connectors.
[Table 9.60] Error code
Video output
MSD-701AMP User Guide
Audio output
"9.11.4 Mute" is set to "ON".
No audio signal is input.
Signal that are not supported by the MSD are
input. (Sampling clock is out of the range).
No audio is output. "9.11.1 Audio output" is
set to "OFF".
"9.5.7 Output format" is set to "DVI MODE" or
a sink device that does not support audio is
*2
connected.
*1
167
Advertisement
Table of Contents
