Table of Contents
Advertisement
MSD-701AMP User Guide
9.20 Startup
9.20.1 Power state
Menu
Top→POWER ON SETTINGS→START-UP MODE
Setting value
Setting value
AUTO [Default]
ON
OFF
You can set the MSD's standby state for when the main [POWER] switch on the rear panel is turned on.
Note:
"[Table 9.57]" is also applied when the power state is changed such as operating an external power supplier
and recovering from power fail.
9.20.2 Command execution for DISPLAY POWER button
Menu
Top→POWER ON SETTINGS→DISPLAY POWER CMD. EXE.
Setting value
AUTO [Default], OFF, ON
You can set the DISPLAY POWER button state at the time of MSD start-up.
"AUTO" : The same state as it was before powering off the MSD or entering standby mode.
"OFF"
: DISPLAY POWER buttons do not operate.
"ON"
: Commands are executed if commands are registered in a DISPLAY POWER button.
[Table 9.53] Command execution registered to DISPLAY POWER button
Setting value
AUTO
OFF
ON
160
[Table 9.52] Power state when POWER is on
Power state before main [POWER] switch is powered off
Powered on
Standby
Condition
DISPLAY POWER button state
before the MSD is powered off or
going into standby.
OFF
ON
OFF
ON
OFF
ON
Power state
State
DISPLAY POWER button state
after the MSD is powered on.
OFF
ON
OFF
ON
【See: 9.16.3 Command link】
Advertisement
Table of Contents
