Automatic Detection Of Video Input Interruption - IDK MSD-701AMP User Manual

Digital multi switcher with integrated audio power amplifier

Table of Contents

9.7.9 Automatic detection of video input interruption

Top→INPUT SETTINGS→INTERRUPTION DETECTION

Setting for

ALL, IN1 to IN7

Setting value

ON [Default], OFF

The MSD stops outputting video immediately after input video signal is disconnected even for a moment.

Use this feature to minimize switching artifacts produced by an external device connected to the MSD's input

connector. The effect of this function is similar to switching the MSD's input.

・ 9.5.10 Window transition effect

・ 9.5.11 Window transition speed

・ 9.5.12 Wipe color

Notes:

・ If you select "ON" and are using a video input (VHS tapes or the like) with a poor quality signal,

it's possible that the output will flash on and off. This is due to sync signal distortion that can be interpreted

as periods of time without signal presence. In this case, set this menu to "OFF".

・ Even if you set this feature to "ON", distorted video cannot be corrected completely when input video

signals are lost. Especially if you set "9.5.10 Window transition effect" to an option other than "CUT",

noises or black bars may be output at the time of fading out or transitional wiping.

MSD-701AMP User Guide

Table of Contents