Aspect Ratio For Sink Device; Image Position - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.4.2 Aspect ratio for sink device

Menu Top→OUTPUT IMAGE→ASPECT RATIO
Setting for MAIN, PinP
Setting value
・RESOLUTION* [Default]
・5:3
* If you select "RESOLUTION", the aspect ratio of the output resolution will be applied. If aspect ratios of the
target sink device and the output resolution are different from each other, you can select one of the following
aspect ratios for the sink device: "4:3", "5:4", "5:3", "16:9", and "16:10".

9.4.3 Image position

Menu Top→OUTPUT IMAGE→IMAGE POSITION
Setting for MAIN, PinP
Setting value
Horizontal position : - Horizontal output size to + Horizontal output resolution [by 1 pixel]
Vertical position : - Vertical output size to + Vertical output resolution [by 1 line]
Pattern
The image position is based on the upper left quadrant of the output video.
Image size should be kept bigger than image position. The image position is set within the range
automatically if the set image position is bigger than the set image size.
PinP settings can be set for each pattern memory.
If PinP is set with PinP disabled, a message, "NOT AVAILABLE NOW", appears.
66
[RESOLUTION]
AUTO-A(1080p59.94)
Outputting at optimal resolution
・16:10
・5:4
[Table 9.2] Default image position (at 1080p)
Main (Horizontal/Vertical)
0/0
－
P1 0/0
P2 0/0
P3 0/0
P4 0/0
P5 0/270
[RESOLUTION]
AUTO-A(1080p59.94)*
EDID cannot be loaded or optimal
resolution cannot be output
・16:9
・4:3
PinP (Horizontal/Vertical)
－(N/A)
80/45
1360/45
80/765
1360/765
960/270