MSD-701AMP User Guide
6 Installation
6.1 Precautions
When installing the MSD, observe the following precautions; otherwise, the internal temperature increases
and it may affect the product lifetime and operation.
・ Do not stack or place one MSD directly on top of another MSD.
・ Do not block vent holes.
・ To provide adequate ventilation, maintain sufficient clearances around the MSD (1.2 in. (30 mm) or more).
・ Consider installing the MSD in an environment compatible with the maximum temperature indicated in the
specification sheet 32°F to 104°F (0°C to +40°C).
6.2 Rack mounting brackets
Attach the rack mounting brackets to the MSD chassis using the supplied M4 screws.
[Fig. 6.1] Attaching rack mounting brackets
Note:
The standard screw tightening torque is 1.47 N・m (about 15.0 kgf・cm).
21