Channel Switching Mode - IDK MSD-701AMP User Manual

MSD-701AMP User Guide
The following attributes are saved for each input signal.
9.4 Output position, size, and
masking
9.6 Input position, size, and
cropping
9.7 Input
9.8 Input timing
9.10 Picture controls
*
9.12 Input audio
* Audio is set based on automatic detection only if digital audio input is selected.

9.3 Channel switching mode

Video and audio signals can be switched simultaneously or separately.
Menu Top→SWITCHING MODE
Setting value V&A
VIDEO : Video
AUDIO : Audio
64
[Table 9.1] Attributes saved for each input signal
9.4.2 Aspect ratio for sink device
9.4.3 Image position
9.4.4 Image size
9.4.5 Cropping
9.6.1 Aspect ratio
9.6.2 Aspect ratio control
9.6.3 Overscan
9.6.4 Image position
9.6.5 Image size
9.6.6 Cropping
9.7.8 Analog input signal parameters
9.8.2 The total number of horizontal pixels
9.8.3 Horizontal start position
9.8.4 Horizontal active area
9.8.5 Vertical start position
9.8.6 Vertical active area
9.8.7 Automatic measurement of start position
9.8.12 Tracking
9.10.5 Input sharpness
9.10.6 Input brightness
9.10.7 Input contrast
9.10.8 Input hue
9.10.9 Input saturation
9.10.10 Input black level
9.12.2 Audio input level offset
9.12.6 Input Lip Sync
: Video & Audio [Default]
【See: 8.3.3 Selecting video and audio separately】