Deep Color; Lpcm Audio; Aac Audio - IDK MSD-701AMP User Manual

9.13.6 Deep Color

Menu Top→EDID SETTINGS→DEEP COLOR
Setting for ALL, IN1 to IN5, IN6 (Digital), IN7 (Digital)
Setting value 24-BIT COLOR [Default], 30-BIT COLOR
You can set the color depth to be output from the source device.
This setting will be valid only if "BUILT-IN EDID" is selected for EDID in "9.13.1 EDID selection" and "HDMI"
is selected for "9.13.4 HDMI/DVI".
If you select "30-BIT COLOR", compared to "24-BIT COLOR", "30-BIT COLOR" is transmitted using a higher
clock frequency. The clock frequency may cause noise if a poor-quality or an excessively long cable is
connected. In such a case, the noise may be removed by setting the color to "24-BIT COLOR".
Press the "MENU/ENTER" button to apply the setting.

9.13.7 LPCM audio

Menu Top→EDID SETTINGS→Linear PCM
Setting for ALL, IN1 to IN5, IN6 (Digital), IN7 (Digital)
Setting value
・48kHz [Default]
・176.4 kHz
You can set the Maximum LPCM sampling frequency that is output from the source device.
This setting will be valid only if "BUILT-IN EDID" is selected for EDID in "9.13.1 EDID selection".
Press the "MENU/ENTER" button to apply the setting.

9.13.8 AAC audio

Menu Top→EDID SETTINGS→AAC
Setting for ALL, IN1 to IN5, IN6 (Digital), IN7 (Digital)
Setting value
・OFF [Default]
・44.1kHz
You can set the maximum AAC audio sampling frequency that is output from the source device.
This setting will be valid only if "BUILT-IN EDID" is selected for EDID in "9.13.1 EDID selection".
Press the "MENU/ENTER" button to apply the setting.
・44.1kHz ・32kHz
・96kHz ・88.2kHz
・96kHz ・88.2kHz
・32kHz
MSD-701AMP User Guide
【See: 9.13.1 EDID selection】
・192kHz
【See: 9.13.1 EDID selection】
・48kHz
【See: 9.13.1 EDID selection】
125