9.11.6 Sampling frequency
Menu
Top→OUTPUT AUDIO SETTINGS→SAMPLING FREQUENCY
Setting value
・192kHz
・96kHz
・88.2kHz
You can set the sampling frequency of digital audio output.
■ "AUTO-A" or "AUTO-B" or "AUTO-C"
Outputting digital audio at the maximum sampling frequency supported by the sink device that is connected to
OUT A (HDMI for AUTO-A) or OUT B (HDMI for AUTO-B) or OUT C (HDBaseT for AUTO-C).
At this time, the sampling frequency that is actually output is displayed in parentheses. In case EDID cannot
be read from the sink device, the sampling frequency that was used the last time is selected with "*" on its
right side.
Maximum sampling frequency
9.11.7 Digital output mixing
Menu
Top→OUTPUT AUDIO SETTINGS→DIGITAL OUT MIXING
Setting for
DIGITAL INPUT, ANALOG INPUT, LINE INPUT, MIC INPUT
Setting value
ON [Default], OFF
You can set input audio to be mixed into digital audio output.
・48kHz
・44.1kHz
・32kHz
[OUT1 FREQUENCY]
AUTO-A(48kHz)
・AUTO-C
・AUTO-B
・AUTO-A [Default]
[OUT1 FREQUENCY]
AUTO-A(48kHz)*
Sampling frequency used last time
MSD-701AMP User Guide
111