Wipe Color; Sink Device Edid Check - IDK MSD-701AMP User Manual

9.5.12 Wipe color

Menu Top→OUTPUT SETTINGS→WIPE EFFECT COLOR
Setting value R/G/B: 0 to 255 [Default] R/G/B: 0 (Black)
You can set the background color for when video input channel is switched.
This menu can be set if "9.5.10 Window transition effect" is set to "WIPE".
If you set "LINK" to "ON", only Red (R) setting values can be changed, and setting values for Green (G) and
Blue (B) will automatically be changed according to the settings of the Red (R).

9.5.13 Sink device EDID check

Menu Top→OUTPUT SETTINGS→EDID ERR. OUTPUT MODE
Setting for ALL, HDMI OUT A, HDMI OUT B, HDBT OUT C
Setting value
Setting value
CHECKSUM DISABLE
[Default]
ENABLE
ALL DISABLE
The MSD gets EDID from the sink device and determines if the sink device is an HDMI device or DVI device.
However, if the MSD cannot get EDID for some reasons, problems such as no audio output and the like may
occur. Select "CHECKSUM DISABLE" or "ALL DISABLE" to output video and audio signals.
Note:
This setting is applied when HDMI signal is input and "9.5.7 Output format" is set to a format other than DVI.
[Table 9.9] Sink device EDID check
Ignores EDID checksum error.
In case of EDID load error, the sink device is treated as a DVI
device.
In case of EDID load error or checksum error, the sink device is
treated as a DVI device.
Ignores sink EDID and follows the MSD's setting.
MSD-701AMP User Guide
【See: 9.5.10 Window transition effect】
Description
【See: 9.5.7 Output format】
77