Cec Connection - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.5.14 CEC connection

Menu Top→OUTPUT SETTINGS→CEC CONNECTION
Setting for HDMI OUT A, HDMI OUT B, HDBT OUT C
Setting value
NOT CONNECTED [Default]
IN1 to IN4, IN5 HDMI, IN5 HDBT
SELECTED CHANNEL
You can set the CEC connection for when a CEC-supported device is connected to HDMI input connector.
Press the "MENU/ENTER" button to apply setting.
Notes:
・ If you do not use CEC, select "NOT CONNECTED".
With CEC connection, if a sink device that is connected to an output connector is changed (for example,
powering on/off) or CEC connection is changed, the MSD changes the address of the connected device. In
that case, EDID may be changed automatically. In this case, the source device stops outputting video
temporarily.
・ CEC connections take place on a one-to-one basis. If you set multiple outputs to connect to the same input,
a channel is selected automatically in alphabetical order. The other outputs will not be connected.
78
[Table 9.10] CEC connection
Setting value Input to be connected
Not connected
CEC is not used.
Specified input channel
Selected input channel