9.18.3 Editing crosspoint
Menu
Top→USER PRESET→EDIT CROSSPOINT
Setting for
No.1 to No.9
Setting value
Setting item
Output channel (OUT)
Video combination (PinP)
Video input channel (VIDEO)
Audio input channel (AUDIO)
Memory name (NAME)
You can edit crosspoint memory settings.
First, select the memory number and press the "MENU/ENTER" button, and then edit the desired setting.
Press the "MENU/ENTER" button to apply the setting.
■ Not controlling channel
If you select "---" when setting input channel of V or A, channels are not controlled.
Outputs that are set not to be controlled are not switched when crosspoint memory is loaded.
Current input channel
OUT = Input channel 2
Current setting of crosspoint memory 1
OUT = Not control (---)
Note:
For PinP editing, only input channel and PinP ON/OFF can be set.
[Table 9.45] Editing crosspoint
MAIN, PinP
--- (not control), OFF,
PATTERN1 to PATTERN5
--- (not control), 1 to 7, OFF
--- (not control), 1 to 7, OFF
20 to 7D of ASCII code
Loading
OUT = Input channel 2
Input setting after loading crosspoint memory
[Fig. 9.30] Loading edited crosspoint memory
Setting value
Setting is not changed.
MSD-701AMP User Guide
Default
MAIN
---
---
---
20 (space)
149