Table of Contents
Advertisement
MSD-701AMP User Guide
9.7.4 HDCP input
Menu
Top→INPUT SETTINGS→HDCP INPUT MODE
Setting for
ALL, IN1 to IN5, IN6 (Digital), IN7 (Digital)
Setting value
ENABLE : Enabling HDCP 1.4 [Default]
DISABLE : Disabling HDCP
Some source devices negotiate with the connected device to determine if HDCP encryption is supported.
After this negotiation, the source device determines whether HDCP signal encryption is enforced or not.
This process takes place with some source device, even if the content being presented is not copyright
protected. The MSD is HDCP compliant, if it is connected to a display device that does not support HDCP,
even unprotected AV content may not be successfully displayed. Under these circumstances and if the
content is indeed not protected, the problem can be solved by setting this menu to "DISABLE."
Video with copyright
protection
Video without
copyright protection
HDCP-
compliant PC
[Fig. 9.12] HDCP-compliant and HDCP non-compliant sink device
9.7.5 Input equalizer
Menu
Top→INPUT SETTINGS→SIGNAL EQUALIZATION
Setting for
ALL, IN1 to IN5
Setting value
ON [Default], OFF
Each HDMI output connector includes an equalizer that compensates for signal attenuation when long HDMI
cables are connected.
Note:
If a cable equalizer, active cable, or the like is connected, the MSD may not equalize output correctly. In such
a case, set this menu to "OFF".
86
HDCP 1.4
MSD
HDCP DISABLE
MSD
Video cannot be displayed
HDCP non-compliant sink device
Video can be displayed
HDCP compliant sink device
Video can be displayed
HDCP compliant/non-compliant sink device
Advertisement
Table of Contents
