Table of Contents
Advertisement
9.6 Input position, size, and cropping
Image position, size, and cropping are set from input side and output side. The input-side settings are based
on the output resolution.
9.6.1 Aspect ratio
Menu
Top→INPUT IMAGE→ASPECT RATIO
Setting for
IN1 to IN7 for each input signal
Setting value
Setting value
THROUGH
FULL
14:9 SIDE PANEL
4:3 SIDE PANEL
14:9 LETTER BOX
16:9 LETTER BOX
14:9
16:9
4:3
AUTO-2
AUTO-1 [Default]
You can set the aspect ratio for each video input.
Normally, no problem occurs if you set the aspect ratio to "AUTO-1", but some DVD players and other devices
display subtitles or setup menus outside of the normal display area. In such cases, set this menu to "AUTO-2"
to display the entire area of the video signals.
[Table 9.11] Restoring aspect ratio (For input signal)
TV signal
Displays input pixels
Provides a full screen output
14:9 SIDE PANEL
4:3 SIDE PANEL
14:9 LETTER BOX
16:9 LETTER BOX
14:9
16:9
4:3
Follows sink device aspect ratio and its setting automatically.
When letter box signal is input, video is output at the following
aspect:
"AUTO-1" : 16:9 or 14:9
"AUTO-2" : 4:3
Fixes mismatch in aspect ratio between a source and sink device
automatically.
MSD-701AMP User Guide
【See: 9.4 Output position, size, and masking】
PC signal
Follows input signal aspect ratio
【See: 9.4.2 Aspect ratio for sink device】
【See: 9.6.2 Aspect ratio control】
79
Advertisement
Table of Contents
