MSD-701AMP User Guide
8.3.5 Controlling source audio volume
Rotate the "SOURCE" knob clockwise to increase the level or anticlockwise to decrease the volume. The front
display shows the set volume level (dB).
The SOURCE LED shows status of SPEAKERs.
・ Immediately after an abnormality of speaker output is detected (LED lights red), the MSD stops outputting
audio signal of the speaker. Since overcurrent may cause the problem, decrease the output volume
slightly.
・ If the SOURCE LED lights amber, SPEAKER 1 or SPEAKER 2 output is clipped. Decrease the output
volume slightly.
M&L
SOURCE
[Fig. 8.8] Controlling source volume (Example: Setting to -60 dB)
40
MIN
-60
【See: 9.11 Output audio】
【See: 9.11.2 Audio output level】
【See: [Table 4.1] Front/side panel features】
SOURCE indicator