Hdbaset Input Long Reach Mode; Hdbaset Power Supply - IDK MSD-701AMP User Manual

9.7.6 HDBaseT input long reach mode

Menu Top→INPUT SETTINGS→HDBT LONG REACH MODE
Setting value OFF : Long reach mode disabled. Up to 328 ft. (100 m) [Default]
ON : Long reach mode enabled. Up to 492 ft. (150 m)
With long reach mode, up to 1080p (24 bit)/dot clock 148 MHz is supported when using with IDK's HDBaseT
product. Set the HDC's EDID to 1080p or less or set the connected device's output to a supported signal
format.

9.7.7 HDBaseT power supply

Menu Top→INPUT SETTINGS→HDBT POWER SUPPLY
Setting value OFF [Default], ON
Set this menu to "ON" to supply power to PoH (IEEE 802.3af)-compliant HDBaseT transmitter.
Press the "MENU/ENTER" button to apply the setting.
Note:
If a PoH (IEEE 802.3af)-compliant product is connected and powered on, the MSD may be damaged.
MSD-701AMP User Guide
【See: 9.13.2 Input resolution】
【See: 9.13.6 Deep Color】
87