Speaker - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

7.3.3 Speaker

■ SPEAKER1 connector can be used for a 4 Ω to 16 Ω speaker
Connect the supplied 4-pin captive screw connector (5.08 mm) to the MSD.
24 AWG to 12 AWG conductor gauge and a strip length of 0.28 in. (7 mm) are recommended.
■ SPEAKER2 connectors can be used for a 4 Ω to 16 Ω speaker or a 100 V (200 Ω to 10 kΩ)
high-impedance speaker
For 4 Ω to 16 Ω speaker:
Connect the supplied 4-pin captive screw connector (5.08 mm) to the MSD.
For 100 V (200 Ω to 10 kΩ) high-impedance speaker:
Connect the supplied 2-pin captive screw connector (5.08 mm) to the MSD.
24 AWG to 12 AWG conductor gauge and a strip length of 0.28 in. (7 mm) are recommended.
You can select a speaker in "9.11.13 SPEAKER 2 output".
Lch+
Lch-
Rch+
Rch-
28
Lch+
Lch-
Rch+
Rch-
4 Ω to 16 Ω speaker
[Fig. 7.6] Connecting speaker (SPEAKER1)
Up to 0.28" (7mm)
4 Ω to 16 Ω speaker
[Fig. 7.7] Connecting speaker (SPEAKER2)
Up to 0.28" (7mm)
【See: 8.3.1 Selecting menu】
Up to 0.28" (7mm)
+
-
100 V (200 Ω to 10 kΩ)
High-impedance speaker