Output Format; Hdbaset Output Long Reach Mode - IDK MSD-701AMP User Manual

9.5.7 Output format

Menu Top→OUTPUT SETTINGS→SIGNAL FORMAT
Setting for ALL, HDMI OUT A, HDMI OUT B, HDBT OUT C
Setting value
・HDMI YCbCr 4:4:4 MODE [Default]
・HDMI RGB MODE
You can select an output signal mode and color space of the output video.
The MSD selects the optimal output mode for the connected sink device according to the following priority
table:
Higher priority HDMI YCbCr 4:4:4 MODE
HDMI YCbCr 4:2:2 MODE
HDMI RGB MODE
Lower priority DVI MODE
Note:
If "DVI MODE" is selected, digital audio is not output.

9.5.8 HDBaseT output long reach mode

Menu Top→OUTPUT SETTINGS→HDBT LONG REACH MODE
Setting value OFF : Long reach mode OFF Up to 328 ft. (100 m) [Default]
ON : Long reach mode ON
You can enable/disable long reach mode for HDBaseT output.
With long reach mode, up to 1080p (24 bit)/dot clock 148 MHz is supported when using with IDK's HDBaseT
product.
Select a supported output format.
・HDMI YCbCr 4:2:2 MODE
・DVI MODE
Up to 492 ft. (150 m)
MSD-701AMP User Guide
【9.4.1 Output resolution】
【See: 9.5.9 Deep Color output】
75