Output Audio - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.11 Output audio

The following audio formats are supported:
Digital audio input/output: Multi-channel audio
Digital audio output, analog audio output, and speaker output: Downmixed audio
■ If multi-channel LPCM signal is input to digital audio:
For sink device, analog audio, and speaker output that do not support multi-channel LPCM signal, 2-channels
(ch) that are set in "9.11.11 Multi-channel audio output" or downmixed audio will be output.
Blu-ray player
■ If bitstream signal is input to digital audio:
Input audio is output to digital audio connector. It is not output to analog audio or speaker output; audio
volume cannot be adjusted.
Blu-ray player
108
5.1ch
Digital input
Matrix
switch
Input level
[Fig. 9.20] Multi-channel LPCM input
Bit stream signals
Digital input
Adjusting audio volume disabled
[Fig. 9.21] Bit stream signal input
5.1ch
Digital output
Selected 2 ch or
down mixed audio
Analog output
Any 2 ch or
down mixed audio
Digital output
Output level
Switch
Digital output
Analog output
Analog audio not output
AV amplifier supporting
multi-channels
Amplifier built-in speaker
LCD monitor not
supporting multi-channels
AV amplifier
Amplifier built-in speaker