Connection Reset; Output Equalizer - IDK MSD-701AMP User Manual

MSD-701AMP User Guide

9.5.5 Connection Reset

Menu Top→OUTPUT SETTINGS→CONNECTION RESET
Setting for HDMI OUT A, HDMI OUT B, HDBT OUTC
Setting value NO [Default], YES
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by
physically disconnecting and reconnecting the digital cables. However, the Connection Reset feature will fix
these problems automatically without the need to physically plug and unplug the cables. It creates the same
condition as if the cable were physically disconnected and reconnected.
Press the "MENU/ENTER" button to perform this feature.

9.5.6 Output equalizer

Menu Top→OUTPUT SETTINGS→SIGNAL EQUALIZATION
Setting for ALL, HDMI OUT A, HDMI OUT B
Setting value
Setting value
OFF [Default]
LOW
MIDDLE
HIGH
* IDK's cable (24 AWG) was used
Each HDMI output connector includes an equalizer that compensates for signal attenuation when long HDMI
cables are connected.
Note:
If a cable equalizer, active cable, or the like is connected, the MSD may not equalize output correctly. In such
a case, set this menu to "OFF".
74
[Table 9.7] Output equalizer setting
Equalization
No equalization
Low
Middle
High
Cable length*
Shorter than 33 ft. (10 m)
33 ft. (10 m) or longer
N/A
✓
✓ ✓
✓ ✓
N/A
✓