Dvi-I Input Connector - IDK MSD-701AMP User Manual

Note:
If there is a problem in the transmission path, video or audio may be interrupted. Check the "[Table 7.1]"
above.
If the problem persists, it may be necessary to shorten the category cable.

7.2.4 DVI-I input connector

Female DVI-I (29-pin) connectors are used for DVI inputs.
Pin assignments for each signal type are shown "10.1 DVI input connector".
Input signal type*
DVI signal
HDMI signal
Analog RGB signal
Analog YPbPr signal
Composite video signal
Y/C signal
*Input signal type can be set from the following menus:
・ 9.7.2 DVI input connector
・ 9.7.8 Analog input signal parameters
[Table 7.2] Supported cables
Use DVI-I or DVI-D cable.
*
Only signal-link is supported.
Use HDMI-DVI conversion cable.
Use conversion cable which has male DVI-I and female
high-density D-sub (15-pin) conversion cable.
Use conversion cables as needed for each signal.
MSD-701AMP User Guide
Supported cable
【See: 8.3.1 Selecting menu】
25