Input Timing - IDK MSD-701AMP User Manual

9.8 Input timing

You can set the timing parameters for analog signal inputs.
The MSD recalls the optimal table from its built-in library of tables and adjusts the input timing automatically,
you typically will not need to change settings in this menu. However, if signals which are not registered in the
MSD tables are introduced to the input or if part of the video image is cut off while relying on the standard
table registered in the MSD, you may optimize the input timing parameters manually.
For digital inputs, you typically do not need to manually set timing parameters, but if part of the video image is
cut off, you may make fine adjustments as required.
Automatic measurement
The total number of horizontal pixels
Horizontal start position
Horizontal active area
Vertical start position
Vertical active area
Automatic measurement of start position
Automatic setting of input timing
Initializing digital input timing
Recalling analog input timing
Saving analog input timing
Tracking
Partly 1 : Can be set only if analog RGB/analog YPbPr signals are input.
Partly 2 : Only displayed if analog video signals are input or for digital input.
Partly 3 : Can be set only if the device data of input signals are registered in the MSD.
[Table 9.16] Settable items
Function
Analog input Digital input
Partly 1 Cannot be set
Partly 1, Partly 2
Can be set Can be set
Can be set Can be set
Can be set Can be set
Can be set Can be set
Can be set Cannot be set
Can be set Cannot be set
Cannot be set Can be set
Partly 3 Cannot be set
Partly 1 Cannot be set
Partly 1 Cannot be set
MSD-701AMP User Guide
Partly 2
91