Rs-232C; Rs-232C Communication; Rs-232C Operation Mode - IDK MSD-701AMP User Manual

9.14 RS-232C

9.14.1 RS-232C communication

Menu Top→RS-232C SETTINGS→PARAMETERS
Setting for ALL, RS1, RS2, HDBT OUT, IN5
Setting value
Connector
ALL,
*1
RS1 ,
*2
RS2 ,
HDBT OUT,
IN5
*1
: RS-232C (CH1),
You can set the RS-232C communication.
Press the "MENU/ENTER" button to apply the setting.

9.14.2 RS-232C operation mode

Menu Top→RS-232C SETTINGS→COMMUNICATION MODE
Setting for ALL, RS1, RS2, HDBT OUT, IN5
Setting value
Connector
ALL
*1
RS1
*2
RS2
HDBT OUT
IN5
*1
: RS-232C (CH1),
You can set the operation mode of the MSD's RS-232C port to either "RECEIVER" mode, enabling the MSD
to be is controlled externally via RS-232C, or "TRANSMITTER" mode, enabling the MSD to control peripheral
devices via RS-232C.
Press the "MENU/ENTER" button to apply the setting.
[Table 9.30] RS-232C communication
Parameter
Baud rate [bps]
Data bit length [bit]
Parity check
Stop bit [bit]
*2
: RS-232C (CH2)
[Table 9.31] RS-232C operation mode
Setting value
RECEIVER, TRANSMITTER
RECEIVER, TRANSMITTER
RECEIVER, TRANSMITTER
RECEIVER, TRANSMITTER
RECEIVER, TRANSMITTER
*2
: RS-232C (CH2)
Setting value
4800, 9600, 14400, 19200,
38400, 57600, 115200
8, 7
NONE, EVEN, ODD
1, 2
Default
RECEIVER
RECEIVER
RECEIVER
TRANSMITTER
RECEIVER
MSD-701AMP User Guide
Default
9600
8
NONE
1
129