Table of Contents
Advertisement
8.3.4 Controlling mic/line volume
Rotate the "MIC/LINE" knob clockwise to increase the level or anticlockwise to decrease the volume. The front
display shows the set volume level (dB).
The MIC/LINE knob setting can be assigned to mic or line separately.
The MIC/LINE LED shows status of MIC and SPEAKER 1.
・ Immediately after an abnormality of speaker output is detected (LED lights red), the MSD stops outputting
audio signal of the speaker. Since overcurrent may cause the problem, decrease the output volume
slightly.
・ If the MIC/LINE LED lights amber, mic input is clipped. Adjust the mic audio input reference level.
M&L
SOURCE
[Fig. 8.7] Controlling mic/line volume (Example: Setting to -50 dB)
【See: [Table 4.1] Front/side panel features】
-50
-60
MSD-701AMP User Guide
【See: 9.12.7 MIC/LINE volume knob】
【See: 9.11.2 Audio output level】
MIC/LINE LED
39
Advertisement
Table of Contents
