Deep Color; Cec Connection - IDK MSD-72 Series User Manual

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-72 Series:
Table of Contents

Advertisement

MSD-72 Series User's Guide

9.7.9 Deep Color

Top → OUTPUT SETTING → DEEP COLOR OUTPUT
Menu
Setting for
Each output channel
Setting value 24-BIT COLOR [Default], 30-BIT COLOR
You can select the color depth of HDMI signal.
"30-BIT COLOR": signal is output with "30-BIT COLOR" only if a sink device supporting Deep Color is
connected. If a sink device that does not support Deep Color is connected, signal is output with "24-BIT
COLOR" automatically. However, since the transmission clock of "30-BIT COLOR" is faster than that of
"24-BIT COLOR", noise may occur if a bad-quality cable or long cable is connected. In those cases, the noise
may be removed by selecting"24-BIT COLOR".
When the MSD outputs at WQHD (2560 x 1440) / WQXGA (2560x1600) / 4K (3840 x 2160) / 4K (4096 x
2160), the color depth is "24-BIT COLOR".

9.7.10 CEC connection

Top → OUTPUT SETTING → CEC CONNECTION
Menu
Setting for
Each output channel
Setting value
・NOT CONNECTED [Default]
・IN1 to IN7
You can set which I/O to be connected when a device supporting CEC is connected.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Notes:
・Using CEC may cause negative effects. If you do not use CEC, set this menu to "NOT CONNECTED". If the
status of the sink devices connected to the HDMI output connector changes (such as being turned OFF→
ON) or if the CEC connection changes, the EDID may also need to be changed (the MSD changes it
automatically) in order to update the address of the connected device. When the EDID is changed, the
source device stops outputting video temporarily. Note the following points to not make the EDID change at
the time of operation.
・IN8 and IN9: CEC is not supported.
・CEC connection is a one-on-one basis; it cannot connect multiple inputs and outputs. If you set multiple
outputs to connect to the same input, only a smaller output number is connected preferentially and other
outputs are not connected.
76
・SELECTED CHANNEL

Advertisement

Table of Contents
loading

Table of Contents