Output Settings - IDK MSD-72 Series Command Reference Manual

3.3.8 Output settings

@GDM / @SDM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set output mode.
Setting Command
example Response
Description Setting the OUT1 output mode to "HDMI YCbCr4: 4: 4 MODE"
Remarks
@GUY / @SUY
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting synchronous signal output when no video signal is input.
Setting Command
example Response
Description Setting OUT1 to "1" (synchronous signal is output even if video signal is not
Remarks
Output mode
@GDM
@GDM, mode_1, mode_2, mode_3, mode_4
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
mode_1-4: Output mode
0 = DVI MODE,
1 = HDMI RGB MODE,
2 = HDMI YCbCr4: 2: 2 MODE,
3 = HDMI YCbCr4: 4: 4 MODE [Default],
4 = HDMI YCbYr4: 2: 0 MODE
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GDM
@GDM,3,0,3,3
OUT2: DVI MODE, other output channels: HDMI YCbCr4: 4: 4 MODE
@SDM,1,3
@SDM,1,3
－
Synchronous signal output when no video signal is input
@GUY
@GUY, sync_1, sync_2, sync_3, sync_4
@SUY, ch_1, sync_1 (, ch_2, sync_2･･･)
@SUY, ch_1, sync_1 (, ch_2, sync_2･･･)
sync_1-4: Synchronous signal output
0 = Not output, 1 = Output [Default]
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GUY
@GUY,1,0,0,0
OUT1: synchronous signal is output.
Other output channels: synchronous signal is not output.
@SUY,1,1
@SUY,1,1
input).
－
MSD-72 series Command Guide
51