MSD-62 series Command Guide
3.3.9 Output settings
@GEQ / @SEQ
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set output mode.
Setting
Command
example
Response
Description Setting the OUT1A output equalizer to OFF.
Remarks
@GDM / @SDM
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set output mode.
Setting
Command
example
Response
Description Setting the OUT1 output mode to "HDMI YCbCr4: 4: 4 MODE"
Remarks
52
Output equalizer
@GEQ
@GEQ, level_1, level_2, level_3, ..., level_8
@SEQ, ch_1, level_1 (, ch_2, level_2・・・)
@SEQ, ch_1, level_1 (, ch_2, level_2・・・)
level_1-8: Output mode
0 = OFF
[Default],
1 = LOW,
2 = MIDDLE,
3 = HIGH
ch_1-8: Output channel
0 = All HDMI outputs, 1 = OUT1A to 8 = OUT8A
@GEQ
@GEQ,3,0,3,3,3,3,3,3
OUT2A: OFF, other output channels: HIGH
@SEQ,1,0
@SEQ,1,0
This command is only for HDMI output connectors.
Output mode
@GDM
@GDM, mode_1, mode_2, mode_3, ・・・, mode_8
@SDM, ch_1, mode_1 (, ch_2, mode_2・・・)
@SDM, ch_1, mode_1 (, ch_2, mode_2・・・)
mode_1-8: Output mode
0 = DVI MODE,
1 = HDMI RGB MODE,
2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GDM
@GDM,3,0,3,3,3,3,3,3
OUT2: DVI MODE, other output channels: HDMI YCbCr4:4:4 MODE
@SDM,1,3
@SDM,1,3
-