Output Settings - IDK MSD-701UHD Command Reference Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide

3.3.7 Output settings

@GDM / @SDM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set output mode.
Setting Command
example Response
Description Setting the OUT1 output mode to "HDMI YCbCr4: 4: 4 MODE"
Remarks
@GUY / @SUY
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting synchronous signal output when no video signal is input.
Setting Command
example Response
Description Setting OUT1 to "1" (synchronous signal is output even if video signal is not
Remarks
50
Output mode
@GDM
@GDM, mode_1, mode_2, mode_3, mode_4
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
@SDM, ch_1, mode_1 (, ch_2, mode_2･･･)
mode_1-4: Output mode
0 = DVI MODE,
1 = HDMI RGB MODE,
2 = HDMI YCbCr4:2:2 MODE,
3 = HDMI YCbCr4:4:4 MODE [Default]
4 = HDMI YCbYr4:2:0 MODE * only OUTA
ch_1-4: Output channel
0 = All outputs, 1 = OUT1A, 2 = OUT1B, 3 = OUT2A, 4 = OUT2B
@GDM
@GDM,3,0,0,0
OUT1A: HDMI YCbCr4:4:4 MODE, other output channels: DVI MODE
@SDM,1,3
@SDM,1,3
Since OUTB (HDBaseT output connector) does not support YCbCr 4:2:0, "HDMI
YCbCr 4:2:0 MODE" cannot be set to the connector.
Synchronous signal output when no video signal is input
@GUY
@GUY, sync_1, sync_2
@SUY, ch_1, sync_1 (, ch_2, sync_2)
@SUY, ch_1, sync_1 (, ch_2, sync_2)
sync_1-2: Synchronous signal output
0 = Not output, 1 = Output
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GUY
@GUY,1,0
OUT1: synchronous signal is output.
OUT2: synchronous signal is not output.
@SUY,1,1
@SUY,1,1
input).
－
[Default]