Table of Contents
Advertisement
MSD-62 Series User's Guide
9.11.4 Deep Color
Menu
Top→EDID→DEEP COLOR INPUT
Setting for
Each input channel, digital input only
Setting value 24-BIT COLOR [Default] 30-BIT COLOR
You can set the color depth to be output from the source device.
This menu is valid only if you select "INTERNAL EDID" for "9.11.1 EDID" and you select a resolution other
than "UNUSED" for "9.11.3 Input resolution for AV devices".
If you select "30-BIT COLOR", compared to "24-BIT COLOR", "30-BIT COLOR" is transmitted using a higher
clock frequency, which may cause noise if a cable with a bad quality or a long cable is connected. In such a
case, the noise may be removed by setting the color to "24-BIT COLOR".
Press the MENU/SET key to apply the setting.
9.11.5 Audio format
Menu
Top→EDID→AUDIO FORMAT
Setting for
Each input channel, digital input only
Setting value [Table 9.18] Audio format
Audio format
PCM
Dolby Digital
AAC
Dolby Digital+
DTS
DTS-HD
Dolby TrueHD
Default values are shown in parentheses.
You can set the audio format and maximum sampling frequency to be output from a source device.
This menu will be valid only if you select "INTERNAL EDID" for "9.11.1 EDID" and you select a resolution
other than "UNUSED" for "9.11.3 Input resolution for AV devices".
Press the MENU/SET key to apply the setting.
108
[Table 9.18] Audio format
ON / OFF
Cannot be set
32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (48)
ON: 32 / 44.1 / 48 (48)
Can be set (OFF)
Can be set (OFF)
ON: 32 / 44.1 / 48 / 88.2 / 96 (48)
ON: 32 / 44.1 / 48 (48)
Can be set (OFF)
Can be set (OFF)
ON: 32 / 44.1 / 48 / 96 (48)
Can be set (OFF)
ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (192)
Can be set (OFF)
ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (96)
Maximum sampling frequency (kHz)
Advertisement
Table of Contents
