Table of Contents
Advertisement
MSD-62 series Command Guide
3 Command
3.1 Command outline
A command consists of "@" ("40" in hexadecimal), 3 one-byte alphabetical characters (upper and lower
cases), and parameters (one-byte numbers
no parameter is required. Processing is executed by sending a delimiter at the end of the command.
Example: @SPM,2
","( a comma, "2C" in hexadecimal) is indicated between a command and parameter and between two
parameters.
■ If there is an error:
An error command is returned if an undefined command or wrong parameter is included.
Example: @SOT,1
@ERR,1
■ Using as HELP
If only delimiter is sent, command list as the help command is returned.
Example:
--------------- HELP (1/14) ---------------
(CHANNEL SELECT Command)
@GSW / @SSW : Get/Set Input Channel
@GSV / @SSV : Get/Set Video Input Channel
@GSA / @SSA : Get/Set Audio Input Channel
12
*
). For some commands, several parameters can be specified or
Advertisement
Table of Contents
