Control Levers And Pedals - Komatsu PW98MR-10 Operation & Maintenance Manual

OPERATION

CONTROL LEVERS AND PEDALS

(1) Lock lever
(2) L.H. work equipment control lever
(3) R.H. work equipment control lever
(4) Swing lock cover
(5) Boom swing control pedal
(6) Travel pedal
LOCK LEVER
• When leaving the operator's seat, set the lock lever securely to LOCK position. If the lock lever is
not at LOCK position and the control levers or control switches are touched by mistake, it may lead
to serious personal injury or death.
• Always check that the lock lever is in LOCK position.
• When pulling the lock lever up, or when pushing the lock lever down, be careful not to touch the
work equipment control lever.
• Before setting the lock lever to FREE position, make sure that all levers and pedals are set to NEU-
TRAL position. If any of them is out of NEUTRAL position, the work equipment or machine may
move suddenly and cause a serious personal injury or death.
• The controls are locked also when the parking brake is engaged.
(7) Steering column lock
(8) Steering wheel
(9) Steering wheel column position adjuster
(10) Brake pedal
(11) 2-piece boom control pedal
k k
WARNING
WENAM00061
EXPLANATION OF COMPONENTS
RKA48530
3-103