Method For Traveling On Road - Komatsu PW98MR-10 Operation & Maintenance Manual

OPERATION

METHOD FOR TRAVELING ON ROAD

• Before moving the machine, make sure that you perfectly know the control functions and all the rel-
evant safety regulations.
• The operator must be seated in the driving position with fastened seat belt.
• Comply with all the road traffic regulations in the country where the machine is used.
• Start the rotating lamp and obscure or switch off the work lights.
• Make sure that the turret is directed towards the front swing axle.
NOTICE
• The travelling direction must be selected with the en-
gine at low rpm and the machine stopped.
Drive on a road
1.
Check that there are no people or obstacles around the area.
2.
Start the engine and set the lock lever (1) to FREE position
(F).
3.
Position the rotating support and the 1st boom aligning the
collimation stops as shown in the figure.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
WENAM00061
RKA48659
RKA52340
3-167