Komatsu PW98MR-10 Operation & Maintenance Manual page 212

MACHINE OPERATIONS AND CONTROLS
2.
Remove bolts (4) (2 places).
3.
Remove cover (1).
4.
Loosen the screws (5) (no. 3) of the camera and adjust the
installation angle (A) of the camera to about 45° with re-
spect to the horizontal plane.
5.
After adjusting, tighten bolts (5).
Tightening: 11.8 to 14.7 Nm {1.2 to 1.5 kgm}
REMARK
A part of the machine is shown on the monitor screen.
6.
Install covers (1) and (2).
3-144
WENAM00061
OPERATION
RKA54640
RKA48640